Installation Instruction
Table Of Contents
- 1 Product information
- 2 Overview
- 3 Warnings
- 4 Unloading from trailer
- 5 Transport and storage
- 6 Unpacking
- 7 Duct connections
- 8 Internal components
- 9 Installation
- 10 Purge sector
- 11 Electrical connections
- 12 Connect the water heating coil
- 13 Access control system
- 14 Connect accessories in Control unit CU27-C
- 15 Dimension and weight
- 16 Technical data
- 17 Additional equipment
- 18 Disposal
- 19 EU Declaration of Conformity
- 20 UK Declaration of Conformity
Installation |
11
9.2 Transport through a standard door (900 mm)
9.2.1 Remove front doors and back side on Topvex SR/TR20-35
Remove the front doors and back side on units Topvex SR/TR20-35 for transportation through a smaller door opening.
See respective dimension drawing for dimensions, chapter 15.
Caution
We advice minimum two persons to remove the back side and the front doors.
Remove front doors
1. Remove the hinge covers with a screwdriver.
2. Remove the hinge pin with a bradawl.
3. Remove the doors.
Fig. 10
254050 | A004