Installation Instruction
Table Of Contents
- 1 Product information
- 2 Overview
- 3 Warnings
- 4 Unloading from trailer
- 5 Transport and storage
- 6 Unpacking
- 7 Duct connections
- 8 Internal components
- 9 Installation
- 10 Purge sector
- 11 Electrical connections
- 12 Connect the water heating coil
- 13 Access control system
- 14 Connect accessories in Control unit CU27-C
- 15 Dimension and weight
- 16 Technical data
- 17 Additional equipment
- 18 Disposal
- 19 EU Declaration of Conformity
- 20 UK Declaration of Conformity
Unpacking |
5
6 Unpacking
Remove the plastic covering the air handling unit.
NaviPad, NaviPad holder, supply air sensor, handles, mounting feet are enclosed inside the unit at delivery. One handle
is packed on top of the air handling unit.
Access control cabinet is loosely packed on the roof of the air handling unit. Mounting position at chapter 9.3.
7 Duct connections
Left (L) and Right (R) indicate the position of the supply air when viewed from access side.
For air handling units with rectangular ducts there are duct connection kits available at www.systemair.com as
accessories.
Supply air
Exhaust air Outdoor air
Extract air
7.1 Topvex SR
Fig. 4
7.2 Topvex TR
Fig. 5
254050 | A004