Installation, Operation and Maintenance instruction 001

1.5 Name plate
1
7
8
9 11
12
2 3 4 5 6
13
10
1. Type designation: Product name, dimension and motor
type. Refer to 1.5.1 Type designation page 2.
2. Current, A
3. Input power, W
4. Frequency, Hz
5. Certifications
6. Scannable code
1
7. Voltage, V
8. IP class, enclosure class
9. Insulation class
10. Serial number: part number/production number/produc-
tion date
11. Nominal fan speed
12. Weight, kg
13. Country of production
Note:
The data on the name plate applies to “standard air” that is
specified in the standard ISO5801.
1.5.1 Type designation
Product name KBR KBR EC KBR/F
Dimension 280 280 280
315 315 315
355 355 355
Motor type D2: 2 pole, 3–phase EC: Electronically commuted
1–phase
D2: 2 pole, 3–phase
D2–4: 2–4 pole, 3–phase EC-K: Electronically com-
muted 1–phase, normal
power
D2–4: 2–4 pole, 3–phase
DV: 4 pole, 3–phase EC-L: Electronically com-
muted 1–phase, high power
DV: 4 pole, 3–phase
E4: 4 pole, 1–phase E4: 4 pole, 1–phase
1.6 Product liability
Systemair is not liable for damages that the product causes
in these conditions:
• The product is incorrectly installed, operated or
maintained.
• The product is repaired with parts that are not original
spare parts from Systemair.
• The product is used together with accessories that are not
original accessories from Systemair.
• The product is used without motor protection.
2 Safety
2.1 Safety definitions
Warnings, cautions and notes are used to point out specially
important parts of the manual.
Warning
If you do not obey these instructions,
there is a risk of death or injury.
Caution
If you do not obey these instructions,
there is a risk of damage to the product,
other materials or the adjacent area.
2
1. Use a mobile device to scan the scannable code and go to the Systemair documentation portal for more documentation and document
translations.