Connect User Guide

8 |
Systemair Connect | User guide
Enter values to the property fields for user, User
name, password, select local language for the
account, and select Areas and Devices the user
should have access to.
With the setup to the right the user will get
access to the complete Area of Gym and also
the Device Topvex LB01 that belong to another
Area.
If the user would have access to several Areas
and/or Devices, select by holding the Ctrl key
and select with the mouse. If nothing selected
from Devices or Areas, the user will have access
to everything in the structure. Remember to
add E-mail address and tick the checkbox if user
should receive an email in case of alarms. Finish
by pressing [Create User].
Create and organize structure
Build structures organized if you want several
users to share the responsibility for all devices
in a building or just some devices in parts of
buildings.
In some cases the account has been predefined
with one Device direct on account level, which
can be reorganized to a substructure, so called
area. In example, account The customer
expanded show a predefined Device, Topvex
LB01, direct on the account.
Building a structure
User with access level SysAdmin can administrate and build structures of areas and devices.
Symbolises the Account level in tree
Symbolises a Device – air handling unit where communication has not yet been
established
Symbolises a Device – air handling unit where communication has been established
once
Symbolises an Area – an area is used to subdivide a structure to ease navigation and
control different user access