User guide Systemair Connect EN Document in original language | 190519 · A002
Contents User manual ABOUT THIS DOCUMENT................................ 3 ACTIVATING ACCOUNT................................... 3 USING SYSTEMAIR CONNECT..........................
| 3 About this document User guide to assist you in getting started with activating, administrating and use of the Systemair Connect account with Access. The user guide is intended both for users responsible for accept terms and condition and administrating the structure and users of the operation and supervision of devices. Activating account An account has been created for you to activate and accept. Information with activation link has been sent to the stated E-mail address.
| Systemair connect activation procedure To start using the service the user must activate the service and follow the presented steps. Following screen shots is an example for the account “The customer”. Before the user has fulfilled the account activation there are no possibility to administrate or add devices to the account. Proceed the activation by pressing the button [Activate]. The account activation now proceed with user sysadmin logged in.
| 5 An acceptance of the Terms and condition is necessary to complete the registration process. Open the Terms and condition by selecting Click here for Terms and conditions link. Accept by ticking in the check box I approve to the terms and conditions and then press [Continue]. Note! It is highly recommended to change the default password at least for the user sysadmin, which can be done via the Edit profile shortcut link.
| Using Systemair Connect Start using the Systemair Connect service. Login Go to www.systemairconnect.com and log in with account and user credentials, press [Log in]. If previous activation has not been finalized this is the way to login and proceed the activation steps, according chapter Activating account. Lost password? Activate the link Forgot your password. Fill form with the name of your Account or E-mail address belonging to the account.
| 7 Access levels Five user access levels exist in Systemair Connect that can be used for user administration. SysAdmin This is the highest user level, permitting viewing and changing all controller settings. The Sysadmin can also add, modify and delete users and add controllers to an account. Service User level that can see and change all values. Cannot add new users, areas or controllers. Admin Same user rights as Service.
| Enter values to the property fields for user, User name, password, select local language for the account, and select Areas and Devices the user should have access to. With the setup to the right the user will get access to the complete Area of Gym and also the Device Topvex LB01 that belong to another Area. If the user would have access to several Areas and/or Devices, select by holding the Ctrl key and select with the mouse.
| 9 Two functions are available for building the substructure on your account: Area Used to divide the installation in several small areas, example buildings, floor plans or rooms. It is possible to restrict user access using the Area. For example, Area can be used if you want to split the installation in 2 areas where you have separate users responsible for each area. Device This function is used when you link an air handling unit controller to Systemair Connect.
| Administration of Area The areas can be edited, moved and deleted. Press [Action] next to the Area you need to edit. Edit Area: Change name, description or comment. Move Area: Move the Area to the Account or to another Area. Delete Area: Delete the Area. Note! Areas with Devices cannot be deleted until Devices has been moved or deleted from the Area. For example, a move of the Area called “Gym”, press [Action] next to it and then select Move Area.
| 11 Enable Systemair Connect Prepare the Access controller of the air handling unit for Systemair Connect using the NaviPad display. 1. Login with Service account (password: 0612) 2. Select Configuration 3. Select System settings 4. Select Communication 5.
| 6. Enable Systemair Connect, when read and approved the pop-up dialog 7. Note the serial number of your device that will be needed later in step Add Device Device properties Following properties can be used for defining the Device: Controller name Mandatory, name of the AHU. Can be changed later on. Serial number Mandatory, serial number on the controller, consisting of 12 digits and starting with “01…”. This is the serial number copied from the Cloud menu.
| 13 Add new Device In following example a device is added and placed in area Gym. Press button [Action] next to the area and then select New Device. Enter values to the properties in the dialog box. Mandatory fields are Controller name and Serial number which need to be both a valid one and not previously connected/used in the service. Finalize with button [Create Device]. The initial connection may take some time before the controller is online. Note! The controller need to have access to Internet.
| Use Systemair Connect When Device is connected to Systemair Connect it is possible to open the Device by selecting it. Overview The first tab is an overview flow chart with operation status. Actual values and setpoints Read the actual control values and setpoints. For all user access levels except Guest the setpoints, values in blue can be changed. Inputs and outputs Read the actual status of input and output values for the air handling control unit.
| 15 Time control Read the actual time control schedules. All user access levels except Guest can modify the settings. Manual and auto Via this tab it is possible for users belonging to access level SysAdmin, Admin and Service to change operation mode and set manual values for some functions. Alarm status and handling Alarm status tab, with indications of active, unacknowledged and blocked alarms. For all user access levels except Guest it is possible to acknowledge and block/unblock individual alarms.
| Settings SysAdmin, Service and Admin can modify control settings for functions. All user access levels can view the values. Select and view charts Record and view analogue values for the control. Select which parameters to be shown in the chart on the available sensor names above the chart. Yaxis resolution adopts to the value ranges and the left is used for pressure and flow while the right is used for temperatures and output percentage.
Industrivägen 3 739 30 Skinnskatteberg Phone +46 222 440 00 Fax +46 222 440 99 www.systemair.
