Connect User Guide

12 |
Systemair Connect | User guide
6. Enable Systemair Connect, when read and
approved the pop-up dialog
7. Note the serial number of your device that
will be needed later in step Add Device
Device properties
Following properties can be used for defining the Device:
Controller name
Serial number
Parent
Description
Comment
Building type
Area (m2)
City
Country
Manual connection
Network address
Use encryption
Encryption key
Mandatory, name of the AHU. Can be changed later on.
Mandatory, serial number on the controller, consisting of 12 digits and
starting with “01…”. This is the serial number copied from the Cloud menu.
Indication which the parent object is, account or area.
Optional, one row of descriptive text.
Optional, comment field.
Optional, selection type of building in which the unit is installed.
Optional, the area supplied by this AHU.
Optional, location where the unit is installed.
Optional, location where the unit is installed.
Selection No/Yes, if a unit exists that is connected to a public IP address, its
address can be entered here, enabling the Systemair server to automatically
locate the controller.
NOTE: This is an advanced function that is normally not intended for use.
Property used only when Manual connection is Yes.
Not supported in Access
Not supported in Access