Handbook CFC AG 202205

9/38 | CFC-AG
APS...CFC-A, APT...CFC-A, APG-CFC-A
Adapter Ledges
Description
The adapter ledges help to adapt the dimensions for installation of the CFC-AG box into the gypsum plaster ceilings,
metal plate ceilings or into the T-bar ceilings (see ceiling type, raster in the ordering code).
Design
The ledges are manufactured from galvanized steel sheet with the same surface finish as the one chosen for the clean
filtering cassette (powder paint in RAL9003, eventually other RAL colour).
Dimensions
The inner opening size of the ledge corresponds to the filter dimensions in the filter cassette.
The outer dimensions of the ledge correspond to the raster size of the ceiling (600 mm or 625 mm) for the metal plate
and T-bar ceilings or extend 50 mm from the inner opening for the plaster board ceilings.
The adapter ledge can be used only for selected sizes and types of CFC-AG in combination with selected raster
and types of the suspended ceilings (see dimension table for CFC-AG filter cassettes).