Fans Accessories for MUB From duct fan to small ventilation unit
Application Areas MUB duct fan – All-rounder for (almost) every application
Our duct fans of the MUB series were developed for both supply and exhaust ventilation. Due to many different product variations, the fan can be used in numerous application areas.
Accessories for our MUB fans Small ideas with big added value Thanks to the wide range of accessories, the MUB is now even more versatile. Filter, heater, cooler and silencer modules are available, as well as various base frames and roofs. With the use of these, your duct fan becomes a small air handling unit. All accessory components can now be selected and ordered online.
Combination examples From duct fan to small ventilation unit KKF-KITCHEN + MUB T EC KKF + MUB EC + KKF KKF + MUB EC + KKH + KKC KKF + MUB EC + WSD + MUB + KKF KKF-ALU + KKF + MUB TS EC + KKF-CAR KKF-ALU + MUB T EC KKS + MUB EC + KKS KKF and KKH: The casing is a self-supporting construction of aluminium profile. Double skin panels made of galvanised sheet steel, with 30 mm sound and heat insulation made of mineral wool. Corners made of high shock-resistant plastic type PA6.
Advantages Your advantages at a glance Short delivery times We keep the accessories for our MUB in stock for you. So you do not have to wait long for your order. Simple and quick selection and ordering Each accessory has an individual article number and can be easily found in our online catalog at www.systemair.de. Use the Systemair WEBSHOP as the most convenient way to order the required articles. One-stop shop Our accessories are matched to our MUB fans in every detail.
systemair 7
KKF – filter section KKF – Filter module for MUB The filter module is designed to support panel-filters of filter classes ePM10 60 %, ePM1 55 % and ePM1 85 % (formerly M5, F7 and F9). The filter can be replaced via a removable inspection-panel. The filter-module can be mounted horizontally or vertically. The panel-filters must be ordered separately. Technical parameters KKF Item no. 025 93310 042 93311 062 93312 100 93313 Dimensions Type 8 Filter panel Item no.
Performances M5 / ePM10 60% 90 80 70 60 Pa 50 40 30 KKF 025 KKF 042 20 KKF 062 10 0 KKF 100 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000 m³/h F7 / ePM1 55% 160 140 120 Pa 100 80 60 KKF 025 40 KKF 042 KKF 062 20 0 KKF 100 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 9500 10000 m³/h F9 / ePM1 85% 250 200 Pa 150 100 KKF 025 KKF 042 50 KKF 062 KKF 100 0 0 500 1000 1500 2000 2500
KKF-ALU – filter section KKF-ALU – Filter-section for MUB/T The filter module is equipped with an aluminium-mesh panelfilter and an aluminium drip tray. The removable inspection-panel allows to pull out the filter together with the drip tray sideways. Technical parameters KKF-ALU Item no. 025 376814 042 376815 062 376816 100 376817 Dimensions Type 10 Alu-Filter Item no.
Performances Pressure drop KKF-ALU filter-section 80 70 60 Pa 50 40 30 KKF-ALU 025 20 KKF-ALU 042 KKF-ALU 062 10 0 KKF-ALU 100 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 9000 m³/h systemair 11
KKF-CAR – filter section KKF-CAR – Filter-section for MUB/T The filter module is equipped with a carbon-cartridgefilter. The removable inspection-panel give you access for maintenance. The access-side can be changed on site. For maximum efficiency of the carbon-odor-filter, the contact time should be 0.2 seconds, until 0.1 seconds an odor-reduction can be achieved. See contact-timediagram. The filter-module can be operated temporarily at higher air volumes for maximum air exchange, according to the curve.
Performances systemair 13
KKF-KITCHEN – filter section KKF-KITCHEN- Filter-section for MUB/T The filter module is equipped with three filter-steps: an aluminium-mesh panelfilter with aluminium drip tray (without drain), a panelfilter ePM1 55 % (F7) and a carbon-cartridge-filter. The module is specially designed for kitchen-exhaust. The removable inspection-panel give you access for maintenance. The access-side can be changed on site. The casing is a self-supporting construction of aluminium profile.
Kennlinie Druckverlust Druckverlust KKF-KITCHEN 400 350 300 Pa 250 200 150 KKF-KITCHEN 042 100 KKF-KITCHEN 062 KKF-KITCHEN 100 50 0 KKF-KITCHEN 127 0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000 14000 m³/h systemair 15
KKH-HW – heater section KKH-HW – Water-heater-section for MUB The heater-module is equipped with a 2-rows waterheating coil. The coil frame is made of galvanized steel, the tubes are made of copper and the fins are made of aluminum. The pipe-connections can be placed right or left in direction of airflow and have external threads, as well as drain and vent screws. Technical parameters KKH-HW Item no.
KKC-W-R and KKC-W-L – cooling section KKC-W – Water-cooler-section for MUB KKC-W-R: Connections in air direction on right side KKC-W-L: Connections in air direction left side The cooler-module is equipped with a 4-rows watercooling coil. The coil frame is made of galvanized steel, the tubes are made of copper and the fins are made of aluminum. An aluminum drip-pan with drain-connection at side and a fix installed drop-eliminator are included.
KKC-DX-R and KKC-DX-L – cooling section KKC-DX – DX-cooler-section for MUB KKC-DX-R: Connections in air direction on right side KKC-DX-L: Connections in air direction on left side The cooler-module is equipped with a 4-rows directexpansion-cooling coil. The coil frame is made of galvanized steel, the tubes are made of copper and the fins are made of aluminum. An aluminum drip-pan with drain-connection at side and a fix installed dropeliminator are included. Technical parameters KKC-DX-R Item no.
KKS silencer-section KKS – Silencer-section for MUB The silencer-module is equipped with splitters with a length of 750 mm. Technical parameters KKS Item no.
GRU-MUB GRU – Base frame for MUB The base frame is specially designed to support the Multibox (MUB) fan modules and has a height of 100 mm. Width and length are adapted to the respective Multibox sizes. The base frame profiles are made of galvanised steel sheet. The screws and nuts required for mounting are included in the scope of delivery. Supplied as a kit.. Technical parameters GRU Item no.
GRU MUB+Filter base frame GRU – Base frame for MUB+FILTER The base frame is specially designed to support the MUB+FILTER fan-filtermodules and has a height of 100 mm. Width and length are adapted to the respective MUB+FILTER sizes. The base frame profiles are made of galvanised steel sheet. The screws and nuts required for mounting are included in the scope of delivery. Supplied as a kit. Technical parameters GRU for MUB+FILTER Item no.
WSD MUB+KKF WSD MUB+KKF Weather protection for combination of Multibox MUB and filter-section KKF Made of seawater resistant aluminum. Edges are welded. Inclusive mounting accessories! We recommend to order the WSD factory mounted or prepared, because special tools are needed! For all other combination suitable weather roofs can be offered on request. Technical parameters WSD MUB + KKF Item no.
WSD MUB+FILTER Weather protection for MUB+FILTER (MUB with integrated filter) Made of seawater resistant aluminum. Edges are welded. Inclusive mounting accessories! We recommend to order the WSD factory mounted or prepared, because special tools are needed! Technical parameters WSD MUB + Filter Item no.
WSD MUB-HEPA WSD 042 MUB-HEPA Weather protection for Multiboxes, type MUB-HEPA. Made of seawater resistant aluminum. Edges are welded. Inclusive mounting accessories! We recommend to order the WSD factory mounted or prepared, because special tools are needed! Technical parameters WSD MUB-HEPA Item no.
Systemair · February 2022 Systemair GmbH Seehöfer Straße 45 D-97944 Boxberg Tel.: +49 7930 9272-0 Fax: +49 7930 9272-92 info@systemair.de www.systemair.
