QUICK CONFIGURATION GUIDE ACCESS SW 4 0 1 04 TO 4 6 1 00 157618A008

4
|
Save commissioning settings
4 Save commissioning settings
When the installation is complete and all functions are tested it is recommended to save a local backup of the current
configuration in the control unit.
Select Yes on Save commissioning settings in the Configuration > System settings > Save and restore
settings menu.
Overview:
Configuration > System settings > Save and restore
settings
24 Jun 10:31
Save commissioning settings
Yes
Step by step:
1.
Select Configuration from the navigation icons
2. Select System settings
3. Select Save and restore settings
4. Select Yes on Save commissioning settings.
5 Quick configuration guides
5.1 Editable naming
The access control unit interface allow for editable naming of the air handling unit, I/O’s (in-/outputs), heating/cooling
sequences and alarms. Edit name in the control unit is done in the Configuration submenus by editing the menu
row Name. Edited names persist if a new language is selected but the menu row Original name will always be trans-
lated and can be used for reference.
5.1.1 Air handling unit naming
The air handling unit’s name is shown in the top-right of the “Home” screen. Edit the name by changing the menu row
Unit name found in the Configuration > System settings > Communications devices menu.
Note:
From version 4.3-1-00 air handling unit's name and description can be edited from System
information > System information setup menu.
Overview:
Configuration > System settings > Communication devices
24 Jun 10:31
Unit name
Systemair controller
Step by step:
1.
Select Configuration from the navigation icons
2. Select System settings
3. Select Communication devices
4. Edit the name of the air handling unit by selecting Unit name.
157618 | A008