Operation and Maintenance Instructions

Table Of Contents

Maintenance

7.2 How to replace supply/extract air filter

The bag filter must be changed when necessary, they cannot be cleaned. We recommend ordering original filters from

Systemair. Operation time between filter changes depends on the air quality. A differential pressure transmitter indi-

cates when it is time to change the filters, which will trigger an alarm in NaviPad.

1. Pull out the old filters and replace with new ones.

2. In NaviPad, log in as operator; 1111 (min. level).

3. Press on the alarm symbol

on the control panel.

4. Choose Filter alarm and press acknowledge.

7.3 How to clean NaviPad

Disconnect the NaviPad power cord. Wipe the NaviPad gently with a soft cloth. Remove resistant marks with mild de-

tergent (intended for touch screens) on the cloth, gently wipe the screen. Do not use other cleaning agents (they may

contain ammonia or other additives).

7.4 How to clean the heat exchanger

Caution

• Do not use detergent containing ammonia

• The heat exchanger is sensitive for impacts. Handle the heat exchanger carefully.

Clean the heat exchanger with hot soapy water. It is also possible to use pressure air, but not with too high pressure.

214959 | A007