ACCESS QUICK CONFIG GUIDE SW 4 0 1 05 157618

Quick configuration guides |
13
4.7 CO2 control (Fan start/stop)
4.7.1 Activation
Activate the Fan start/stop function for CO2 control from the list of available functions in the Configuration > Func-
tions > Function activation menu.
Overview:
Configuration > Functions > Function activation
04 Apr 13:54
CO2 Control
Fan start/stop
function
Step by step:
1.
Select Configuration from the navigation icons
2. Select Functions
3. Select Function activation
4. Press CO2 Control
5. Select Fan start/stop function from drop down list.
4.7.2 Configuration
Select which fan speeds the unit should start/run on when CO2 control Fan start/Stop function is active in the
Configuration > Functions > CO2 Control menu.
Overview:
Configuration > Functions > CO2 control
04 Apr 13:54
Setpoint supply air fan when CO2 control Normal speed
Setpoint exhaust air fan when CO2 control Normal speed
Step by step:
1.
Select Configuration from the navigation icons
2. Select Functions
3. Select CO2 control
4. Set the desired supply air fan speed for Fan start/stop function as Setpoint supply air fan when CO2
control
5. Set the desired extract air fan speed for Fan start/stop function as Setpoint extract air when CO2
control.
157618 | A002