ACCESS QUICK CONFIG GUIDE SW 4 0 1 05 157618

Quick configuration guides |
3
4 Quick configuration guides
4.1 Editable naming
The access control unit interface allow for editable naming of the air handling unit, I/O’s (in-/outputs), heating/cooling
sequences and alarms. Edit name in the control unit is done in the Configuration submenus by editing the menu
row Name. Edited names persist if a new language is selected but the menu row Original name will always be trans-
lated and can be used for reference.
4.1.1 Air handling unit naming
The air handling unit’s name is shown in the top-right of the “Home” screen. Edit the name by changing the menu row
Unit name found in the Configuration > System settings > Communications devices menu.
Overview:
Configuration > System settings > Communication devices
04 Apr 13:54
Unit name
Systemair controller
Step by step:
1.
Select Configuration from the navigation icons
2. Select System settings
3. Select Communication devices
4. Edit the name of the air handling unit by selecting Unit name.
Note:
Default Unit name is either Systemair controller or the unit model name. e.g. Topvex TR03 HW CAV.
4.1.2 I/O naming
Change the name of an I/O (in-/outputs), for example a temperature sensor, by selecting the desired I/O function in
the Configuration > I/O allocation settings sub menus and changing the menu row Name.
Overview:
Configuration > I/O allocation settings > Analog
inputs
04 Apr 13:54
Analog inputs
Device Position
Supply air temperature
Controller
AI1
Configuration >... > Analog inputs > Supply air
temperature
04 Apr 13:54
Name
Supply air temperature
Original name Supply air temperature
Step by step:
1.
Select Configuration from the navigation icons
2. Select I/O allocation settings
157618 | A002