ISO+ DUCT INFO SHEET

Systemair ISO
+
duct system
A perfect combination of thermal and acoustic insulation
Systemair ISO
+
duct
Systemair ISO+ duct is a range of insulated ducts and
sheets. Perfect for installing a residential ventilation
system.
The special composition of the ducts provides both
thermal and acoustic isolation. Preferably, this duct is a
connection between the unit and the outer wall (fresh
and exhaust air) and for the pipes used in unheated areas.
Material properties
The outer shell is made of high density polyethylene
(HDPE) and the inner shell of polyolen with closed cell
structure. The cuffs are made of EPDM rubber.
• Nominal diameter: ⌀ 160 mm or 200 mm outside;
⌀ 125 mm or 170 mm inside
• Thermal conductivity: 0,040 W/mK at 40 °C
• Fire protection class: outer shell B2, inner duct B1
Benets
• Sound-absorbing: excellent sound properties by the
combination of a ribbed hard outer shell with trapped air
chambers and a foam insulation on the inside.
• Solide: due to the robust PE outer shell sagging of the
duct is considerably reduced
• Easy to handle: two nominal sizes DN 125 mm and
DN 180 mm, with transitions to spiral seam
• The connection cuffs are exible and compensate
tension of the duct. The cuffs are a solid and secure
connection.
• The entire product line is fully recyclable and there is
no waste during production
Systemair GmbH · Seehöfer Straße 45 · 97944 Boxberg
Tel.: [phone] · [e-mail] · www.systemair.de
Item No. Name Description
314877 ISO
+
B45/160-125 ISO+ bend 45°, DN 160-125
314878 ISO
+
B45/200-180 ISO
+
bend 45°, DN 200-180
314879 ISO
+
B90/160-125 ISO
+
bend 90°, DN 160-125
314880 ISO
+
B90/200-180 ISO
+
bend 90°, DN 200-180
314881 ISO
+
C160-160 ISO+ connector DN 160-160, made of EPDM
314882 ISO
+
C200-200 ISO+ connector DN 200-200, made of EPDM
314883 ISO
+
R160-125 ISO+ transition to Spiro DN 160-125, made of EPDM
314884 ISO
+
R160-125 ISO+ transition to Spiro DN 160-125, asymmetric, made of EPDM
314885 ISO
+
R200-160 ISO+ transition to Spiro DN 200-160, made of EPDM
314886 ISO
+
R200-180 ISO+ transition to Spiro DN 200-180, made of EPDM
314887 ISO
+
D160-125 ISO+ duct DN 160-125, 2 m length
314888 ISO
+
D200-180 ISO+ duct DN 200-180, 2 m length