Installation, Operation and Maintenance instruction 001

1 Introduction
1.1 Product description
The product is a centrifugal thermo box fan with a casing
made from galvanized steel and mineral wool as insulation.
The product is applicable for transportation of clean or conta-
minated air in extract air ventilation systems.
1.2 Intended use
KBR and KBR EC are applicable for kitchen exhaust ventila-
tion with a maximum constant airflow temperature of 120 °C.
KBR/F is applicable for smoke extraction with a maximum
constant airflow temperature of 200 °C in normal working
conditions. If there is a fire, KBR/F can have a a maximum
constant airflow temperature of 400 °C for 2 hours one time.
If KBR/F has a maximum constant airflow temperature of 400
°C for 2 hours, it must be replaced.
The product is not applicable for transportation of air that
contains explosive, flammable or aggressive media. The
product is not applicable for locations where there is a risk of
explosion.
1.3 Document description
This document contains instructions for installation, operation
and maintenance of the product. The procedures must be
done by approved personnel only.
Speak to Systemair for more information on how to install the
product in different installation locations.
1.4 Product overview
2
1
3
10
9
5
6
4
7
8
1. Duct connection
2. Casing
3. Service door
4. Name plate
5. Motor
6. Motor name plate
7. Connection box
8. Handle
9. Mounting feet
10. Fan impeller
1