SYSVRF2 CASSETTE 1W IM

Fig.9-5 (18-36model
Fig.9-6 (45-71model
Wire slot
Indoor
power
supply
Indoor unit
Signal wire for communicate
indoor unit and outdoor unit
Grounding line
Grounding line
Outdoor
power
supply
RCCB
RCCB
Fig.9-4
Indoor Unit Wiring Guideline
10
installation manual
Panel control/
display box
wire
Panle wind
deflector
motor wire
Wind deflector motor wire cable plug connects
to the CN21 of the main control panel
Motor wire should goes through this
gap to enter the electric control box
Control box wire cable plug connects to the CN15 of the main control panel
Control box wire should goes through this gap to enter the electric control box
This wiring figure only for wiring method reference, the
actual product may be different with this figure, please
subject to the actual prodect!
Ribbon which can
be used repeatedly
Press down
can loosen
Caution! For wiring
convenience, two
communicative
terminals can be
pulled out from
wiring plate.
Power wiring socket
Grounding
connection
position
Power wire
Communication
wire
2 wires on the panel pass into the electric control box through this opening
10-core cable plug on the panel connects to CN15 of the main control board
5-core cable plug on the panel connects to CN21 of the main control board
Please use wire clamp to fix the cable,
otherwise it will result in short circuit
caused by wire looseness