SYSVRF2 CEILING IM

4
Fig.4-7
Hanging arm
Remove the side board and the grille.(Refer to Fig. 4-8)
(For models 112 and 140, do not remove the grille.)
Fig. 4-8
Side board
Grille
Locate the hanging arm on the hanging screw bolt.
(Refer to Fig. 4-9)
Prepare the mounting bolts on the unit.( Refer to Fig. 4-10)
Screw nut
Washer
Hanging
screw bolt
Hanging arm
Fig.4-9
20～25mm
Hang the unit on the hanging arm by sliding backward. Securely
tighten the mounting bolts on both sides.(Refer to Fig. 4-11)
Mounting bolt(max.40mm)
Fig. 4-10
8～13mm
INDOOR UNIT
4.3 Ceiling Installation
(model 36 ~ 140)
The dimension of the unit (Unit: mm)
4.4
Hanging arm
Mounting bolt
Hanging
screw bolt
D. Connecting point of
refrigerant pipe
(D.gas side)
Drain point
E. Connecting point of
refrigerant pipe
(E. Liquid side)
Fig. 4-11
The figures above are based on model 45 as rated
capacity,which may differ from the unit you purchased.
Table 4-1
20mm
1670 680 244 1070 450 1542 200
MODEL
36~71
80~90
112~140
A B D E F GC
990 660 203 505 506 907 200
1280 660 203 795 506 1195 200
CAUTION
G
C
3.Hang the unit on the hanging arm by sliding backward. Securely
tighten the mounting bolts on both sides.