RC08A Remote control manual

Table Of Contents

In cooling mode or dehumidifying mode, 1 hour after the sleep curve is set, the setting

temperature will rise by 1 degree C , 2 hours later, the setting temperature will rise by 2

degree C. After 3 hours, the setting temperature will not change any more.

Press button I FEEL to activate the I FEEL function. Thermometer sign will appear on

the LCD operation display .Select suitable temperature setting. Make sure that

the remote control unit is aimed at the air conditioner. Prevent the I FEEL sensor from

being affected by heat sources such as lamps, heaters, direct sun, etc. or from being

directly affected by the air conditioner air flow.These may cause the sensor to transmit

the wrong temperature data, thereby disturbing the performance of the I FEEL function.

By pressing - and + bottoms simultaneously to lock the last operation program. All the

function buttons will be inoperative, including POWER button. By pressing both buttons

again the remote control will be released from its locked position.

I FEEL/ROOM TE MP FUNCTION OPERATION

LOCK FUNCTION

SETTING THE TIMER

The timer can be selected by pressing TIMER ON button.

The daily timers can be set for ON and OFF separately for two different time periods.

Timer setting will not change until new setting is input.

A) HOW TO SET THE ON TIME

1. Press the TIMER ON button to select the

desired timer.

2. Press the TIMER ON button till the ON sign

blinks.

3. Press the + or - button until the desired

value is displayed.

4. Press the TIMER ON button to activate the

timer.

B) HOW TO SET THE OFF TIME

1. Press the TIMER OFF button to select the

desired timer.

2. Press the TIMER OFF buttons till the OFF

sign blinks.

3. Press the + or - button until the desired

value is displayed.

4. Press the TIMER OFF button to activate the

timer.

OPERATIION

In heating mode, 1 hour after the sleep curve is set, the setting temperature will

decrease by 1 degree C 2 hours later, the setting temperature will decrease by 2

degree C. After 3 hours, the setting temperature will not change any more.