RC08A Remote control manual

2
1
DISPLAY
Information are displayed when the remote control unit is powered up.
Operation Mode
Automatic
Fan only
Displayed when data trasmitted
Heating
Dehumidification (dry)
Cooling
Clock (Set hours and minutes)
Displayed when the “ timer on ” is set and activated
Displayed when the “ timer off ” is set and activated
Indicate that the is activatedClean mode
Displayed in Sleep Mode Operation
Display when ionizer is activated
Indicate that the air conditioner is operating in Economy mode
Set temperature or show room temperature
Displayed when the temperature is the room temperature
Indicate that the air conditioner is operating in I FEEL mode
Automatic horizontal air flow oscillation switched on (only selected model)
Automatic supply air flap oscillation switched on
Description of Low battery detection
• The low-battery indicator on the remote control will continue to
blink when the batteries are low, it may reduce the transmission
distance of the remote control and the display becomes blurred.
Replace with new batteries immediately.
• The low-battery indicator will disappear after the batteries are
replaced.
Low speed
High speed
Turbo Function
Medium speed
Automatic fan speed
Fan speed indication
ON/OFF OPERATION BUTTON
This button turns the air conditioner ON and OFF.
MODE SELECTOR BUTTON
Press this button to modify the air conditioner mode.
(automatic)
When this setting is selected, the air conditioner calculates the
difference between the thermostat setting and the room temperature
and automatically switches to the "cool" ,"dry" or "heat" mode.
(heating)
The air conditioner makes the room warmer.
dehumidification (dry)
The air conditioner reduces the humidity in the room.
(cooling)
The air conditioner makes the room cooler.
(fan)
The air conditioner circulate the air.
COOL / DRY / HEAT
SLEEP
Press this button to turn the
SLEEP mode ON or OFF.
For the detail, see “SLEEP
MODE” function description.
PRECAUTIIONS
2
buttons of the remote
control unit, the
mark appears on the
display to transmit the
setting changes to
the receiver in the air
conditioner.
TRANSMITTER
When you press the
SENSOR
inside the remote
control unit detects the
room temperature
Where the remote
control is located.
Air temperature sensor
TEMPERATURE SETTING BUTTONS
- (cooler) Press this button to decrease the
set temperature.
+ (warmer) Press this button to increase the
set temperature.
FAN SPEED SELECTOR BUTTON
Low speed.
High speed.
Turbo Function.
Fan speed is automatically selected by
the microcomputer.
Medium speed
Silent speed
CLOCK BUTTON
Push this button to the present time.For detail
see “HOW TO SET THE PRESENT TIME”.
TIMER SETTING
CLEAN BUTTON
SWING BUTTON
ECO BUTTON
I FEEL TEMPERATURE
SENSING AND ROOM
TEMPERATURE
DISPLAY BUTTON
ION(OPTIONAL
Push this button to
activate the temperature
sensing function to be
around the remote control.
TEMP BUTTON
LIGHT BUTTON
Press this button to turn the indoor unit
display ON or OFF.
Press this button to
turn the lonizer on for
cleaning the indoor air.
This function is
optional.
Press this button to indicate set temp,
indoor temperature or outdoor
temperature.
Press this button, the remote control will adjust
the temperature setting automatically to save
energy. The temperature display will show "SE"
Press button “-” and “+” simultaneously to lock
or unlock the keyboard.
Press the button ON and OFF to start timer ON
and OFF setting procedure Details, please see
“SETTING THE TIMER”.
This button turns the clean function ON and
OFF in cooling an dehumidifying mode.d
Press this button to activate the supply air flap
to various position or auto swing. Detail see
“ADJUSTING THE AIR FLOW DIRECTION”.