MANUAL DVP002
Table Of Contents
- 1 General information
- 2 Important safety information
- 3 Warranty
- 4 Delivery, transport, storage
- 5 Description
- 6 Name plate and type key
- 7 Accessories
- 8 Installation
- 9 Electrical connection
- 10 Commissioning
- 11 Operation
- 12 Troubleshooting/maintenance/repair
- 13 Cleaning
- 14 Deinstallation/dismantling
- 15 Disposal
- 16 EU Declaration of conformity
- 17 Commissioning Report
14
|
Commissioning Report
Fan
Description:
Article no.: Manufacturing order no.:
Installer
Company: Contact person:
Company address:
Tel. no.: Email:
Operator (Place of installation)
Company: Contact person:
Company address:
Tel. no.: Email:
Type of connection
Yes No
Directly to mains
□ □
0-10 V signal (EC motor)
□ □
via contactor control
□ □
Transformer
□ □
Frequency converter
□ □
Sinus filter
□ □
Shielded cables
□ □
Motor protection
Yes No
Motor protection switch or motor protection relay
□ □
PTC resistor
□ □
Resistance value [Ω]:
Thermal contact
□ □
Electrical motor protection
□ □
Others:
Functional check
Yes No
Impeller easily rotatable (by hand)
□ □
Rotation direction acc. to directional arrow
□ □
Smooth running without unusual noise/
vibrations
□ □
Nominal data - Fan (name plate on fan housing)
Voltage [V]: Current [A]:
Frequency [Hz]: Power [kW]:
Fan impeller speed [rpm]:
Measured data at commissioning
Voltage [V]: Temp. of transported air [°C]:
Current L1 [A]*:
Fan impeller speed [rpm]:
Current L2 [A]: Air volume [m3/s]:
| 002