MANUAL DVP002
Table Of Contents
- 1 General information
- 2 Important safety information
- 3 Warranty
- 4 Delivery, transport, storage
- 5 Description
- 6 Name plate and type key
- 7 Accessories
- 8 Installation
- 9 Electrical connection
- 10 Commissioning
- 11 Operation
- 12 Troubleshooting/maintenance/repair
- 13 Cleaning
- 14 Deinstallation/dismantling
- 15 Disposal
- 16 EU Declaration of conformity
- 17 Commissioning Report
Accessories
|
7
7 Accessories
Note:
For details of the accessories, please check our online catalog or contact Systemair.
Table 4 Accessories
1
2
3
4
5
6
1 DVP Fan
2 VKS-DVP
Back draft damper
3 ASF-DVP
Inlet flange
4 ASS-DVP
Flexible inlet connection
5 FDS
Flat roof socket
6 SDS
Slanting roof socket
Note:
If the degree of inclination is higher than 5°, a
SDS (Slanting roof socket) has to be used.
Note:
Systemair recommends a Back draft damper
(VKS) to avoid cold air intake at a standstill of
the fan, see 7 Accessories, page 7.
8 Installation
Safety information
♦ Fans installed in areas where personnel access regularly must be equipped with a splinter guard, please contact
Systemair.
♦ Observe 2 Important safety information, page 1
♦ Use installation material with fire resistance classes that meet temperature requirements.
♦ Provide contact and intake protection and ensure safety distances according to DIN EN ISO13857 and DIN 24167-1.
♦ To reduce transmission of vibration to the duct system, we recommend flexible connections from our accessory
range, see chapter Accessories.
♦ The materials the fan is made of have to be compatibel to the transported media.
♦ The fan must not bear the weight and dilation of ducting or chimneys.
Preconditions
| 002