SAVE CONNECT module User Manual Document in original language | 254977 · v6 GB
© Copyright Systemair UAB All rights reserved E&OE Systemair UAB reserves the rights to change their products without notice. This also applies to products already ordered, as long as it does not affect the previously agreed specifications. Systemair is not liable or bound by the warranty if these instructions are not adhered to during installation or service.
Contents 1 2 3 4 5 6 7 8 About the SAVE CONNECT module ......................1 Installation and configuration .............................1 2.1 Connection to Internet with Ethernet cable ...................................................2 2.2 Wireless connection using WPS function ...............................................2 2.3 Wi-Fi connection setup using a control panel...................................................3 2.4 Wi-Fi connection setup using a mobile application......................
About the SAVE CONNECT module | 1 About the SAVE CONNECT module SAVE CONNECT module is a device that allows to control SAVE ventilation unit with a mobile application or any internet browser. The SAVE CONNECT module also provides additional features: software updates, Local Modbus TCP to RTU conversion mode, configuration file storing/import and export functions and remote technical service possibilities. Note: SAVE CONNECT module uses TCP/IP port 8989 for outgoing connections.
2 | Installation and configuration If wired connection is not an option and a home router does not support WPS function. • Wi-Fi connection setup using a mobile application. See 2.4 Wi-Fi connection setup using a mobile application, page 3. If wired connection is not an option and a home router does not support WPS function and control panel is not available. 2.
Installation and configuration | established. Reset the SAVE CONNECT module to default settings and try again. See chapter 3 Resetting to default settings, page 5. 4 Once the SAVE CONNECT module is connected to the wireless router, it will automatically establish connection with the Cloud server (it should not take longer than 1 minute). The LED will continue blinking once per second in green colour. Proceed to chapter 5 First login to SAVE CONNECT application for login instructions. 2.
4 | Installation and configuration 1. Activate a hotspot mode by pressing a button on the SAVE CONNECT module 3 times in 3 seconds. Orange colour LED (1) should start blinking. The SAVE CONNECT module will reboot and switch to the hotspot mode – broadcasting its own Wireless Local Area Network (WLAN). Name of the broadcasted WLAN matches the IAM ID (IAM_ 2480000xxxxx). 2. Connect to the broadcasted WLAN (IAM_2480000xxxxx). The ID is printed on the backside of the SAVE CONNECT module.
Resetting to default settings | Note: The SAVE CONNECT module is not allowed to connect to unprotected networks! Make sure your selected Wi-Fi network has a password. If the Wi-Fi network list do not appear or application shows an error, check application permissions in the device settings. 4. Quit the mobile application and connect to your usual Wi-Fi. 5. Proceed to chapter 5 First login to SAVE CONNECT application for login instructions.
6 | Setting the SAVE CONNECT module to Modbus TCP converter mode 1 Find the SAVE CONNECT module IP address. The IP address is dynamic and will be different at different installations. 2 Open your internet browser and enter the IP address of your SAVE CONNECT module (e.g. http://172.16.10.50). 3 Type in the SAVE CONNECT module interface password in the opened login screen. The password can be found on a back label of the SAVE CONNECT module. A.
Setting the SAVE CONNECT module to Modbus TCP converter mode | • Modbus Gateway TCP-RTU/RS485 mode switches the SAVE CONNECT module to Modbus TCP converter mode. D. Indicates the modbus device ID. E. Choose between automatically generated IP or static IP. F. Allow the SAVE CONNECT module to connect to the router directly by providing your local Wi-Fi network name and password. This can be used if the router does not support WPS function. The device supports WPA-PSK and WPA2–PSK only. G.
8 | Declaration of Conformity 7 Declaration of Conformity Manufacturer Systemair UAB Linų st. 101 LT–20174 Ukmergė, LITHUANIA Office: +370 340 60165 Fax: +370 340 60166 www.systemair.com hereby confirms that the following product: Radio equipment: SAVE CONNECT (The declaration applies only to product in the condition it was delivered in and installed in the facility in accordance with the included installation instructions.
USER AGREEMENT | 8 USER AGREEMENT This product includes software code developed by third parties, including software code subject to the BSD license: LWIP, Copyright © Swedish Institute of Computer Science and others Newlib, Copyright © Red Hat Incorporated and others You may use the Service in accordance with the provisions set out in this Agreement.
10 | USER AGREEMENT Updates, interruption and limitation of access to the Service Indemnification Systemair may at any time limit your access to, or use of the Service in order to limit damage caused Systemair, its supplier(s) or other users, by your use, or the supply of, the Service.
254977 | v6
Phone +370 340 60165 Fax +370 340 60166 www.systemair.com SAVE CONNECT module · User Manual · 254977 · en_GB · 2021-06-17 · v6 Systemair UAB Linų st.
