IMO AW 1000D EC SILEO DE,EN

Operating instructions
2. INTENDED USE
The device is exclusively designed asabuilt-in device for conveying
air according to its technical data.
Any other usage above and beyond this does not conform with the
intended purpose and constitutes misuse of the device.
Customer equipment must be capable of withstanding the mechanical
and thermal stresses that can arise from this product. This applies for the
entire service life of the equipment in which this product is installed.
Intended use also includes
● Using the device only in power systems with grounded neutral (TN/
TT power systems).
● Using the device only in stationary systems.
● Performing all maintenance work.
● conveying air at an ambient air pressure between 750 mbar and 1050
mbar.
● Using the device within the permitted ambient temperature range; see
Chapter 3.6 Transport and storage conditions and
Chapter 3.2 Nominal data.
● Operating the device with all protective devices.
● Following the operating instructions.
Improper use
In particular, operating the device in the following ways is prohibited and
could be hazardous:
● Operating the device in an unbalanced state, e.g. due to dirt deposits
or ice formation.
● Operation in medical equipment withalife-sustaining or life-support
function.
● Operation with external vibrations.
● Conveying solids in the flow medium.
● Painting the device
● Connections (e.g. screws) coming loose during operation.
● Opening the terminal box during operation.
● Conveying air that contains abrasive particles.
● Conveying highly corrosive air, e.g. salt spray. Exception: devices
designed for salt spray and correspondingly protected.
● Conveying air with high dust content, e.g. suctioning off sawdust.
● Operating the device close to flammable materials or components.
● Operating the device in an explosive atmosphere.
● Using the device asasafety component or to perform safety-related
functions.
● Operation with completely or partially disassembled or manipulated
protective devices.
● In addition, all applications not listed among the intended uses.