OPERATION INSTRUCTIONS DANFOSS ENG

For EMC-compliant installation

•

Establish electrical contact between cable shield

and adjustable frequency drive enclosure by

using metal cable connectors or by using the

clamps provided on the equipment (see

chapter 4.6 Motor Connection).

•

Use high-strand wire to reduce electrical

interference.

•

Do not use pigtails.

NOTICE!

POTENTIAL EQUALIZATION

Risk of electrical interference, when the ground potential

between the adjustable frequency drive and the system

is different. Install equalizing cables between the system

components. Recommended cable cross-section: AWG 6

[16 mm

Electrical Installation Instruction Manual