Brochure GEO 300/500

4 systemair
The Filter can be placed at Pos. A or B. Therefore the
GEO can be exiblily used as either right or left version.
Accessories
Item no.
GEO PE Pipe, ND 12,5, ND 32, 100 m/Roll
304981
GEO PE pipe DN 32mm
Item no.
Etyhylenglycol till -33 °C, ready-mixture (50 %), 30 L
277090
GEO Etyhylenglycol
The GEO PE Pipe gets embedded in the surrounding
earth of the property and is used to transport the brine
liquid. It should be placed about 1,5-2m deep into the
earth. Both endings of the Pipe should go into the House
to connect them to the GEO.
Brine Liquid based on monethylenglycol (MEG) and
corrosion protection additives. For protection of Frost
and Corrosion in the System. It is a ready to use mixture,
which consist of 50% water and 50% glycol. Because
of that the Brine Liquide can be lled into the System
and is ready for use without any additional steps. In a
standard Pipe System with 100m DN32, approximately
87 liters of the mixture are required.
With the GEO Heat Exchanger, you get the all in one
Package. It already includes a pump to get the brine
liquid through the Pipe system. A cable, which is already
connected to the GEO, establishes the connections
between the GEO and the SAVE Air Handling Unit.
All and more!
With the Help of our SAVE Control the Geo can be
operated easily. To round it all up it also comes with an
integrated Filter Coarse 70% (G4) and a temperature
sensor.