User Manual
Manuals
Brands
Systemair Manuals
Geo thermal systems
GEO 500
21
22
23
24
25
26
27
28
29
30
Table Of Contents
GB User Manual
1 Introduction
1.1 Product description
1.2 Intended use
1.3 Document description
1.4 Product overview
1.5 Name plate
1.6 Product liability
2 Safety
2.1 Safety definitions
2.2 Safety instructions
2.3 Personal protective equipment
3 Transportation and storage
3.1 Package content
4 Installation
4.1 To do before installation of the product
4.2 To install the product
4.2.1 To install the geothermal heat collector
4.2.2 To fill the geothermal heat collector circuit
5 Electrical connection
5.1 To do before the electrical connection
5.2 To connect the product to the power supply
5.3 To connect the product to the ventilation unit
6 Commissioning
6.1 To do before the commissioning
6.2 To configure the ventilation unit
6.3 To vent the system
6.4 To adjust the geothermal heat exchanger pump
6.4.1 Control modes and functions
7 Operation
7.1 To start the product
7.2 To stop the product
7.2.1 To stop the product in an emergency
8 Maintenance
8.1 Maintenance schedule
8.2 To replace filter
8.3 To examine the pressure and fill the system
8.4 To clean the product
8.5 To clean condensate drain
8.6 To replace the pump
8.7 To replace the expansion tank
8.8 To replace the filling valve
8.9 To replace the pressure gauge
9 Troubleshooting
10 Disposal
10.1 To disassemble and discard the parts of the product
11 Warranty
12 Technical data
12.1 Technical data overview
12.2 Wiring diagrams
13 EU Declaration of Conformity
14 Installation report
DE Bedienungsanleitung
1 Einleitung
1.1 Produktbeschreibung
1.2 Bestimmungsgemäße Verwendung
1.3 Dokumentbeschreibung
1.4 Produktübersicht
1.5 Typenschild
1.6 Produkthaftung
2 Sicherheitshinweise
2.1 Sicherheitsdefinitionen
2.2 Sicherheitsvorschriften
2.3 Persönliche Schutzausrüstung
3 Transport und Lagerung
3.1 Packungsinhalt
4 Installation
4.1 Vor der Montage des Produkts müssen folgende Schritte ausgeführt werden:
4.2 Installieren des Produkts
4.2.1 Installieren des Erdkollektors
4.2.2 Befüllen des Erdwärmekollektors
5 Elektrischer Anschluss
5.1 Vor dem elektrischen Anschluss auszuführende Schritte
5.2 Anschließen des Produkts an die Stromversorgung
5.3 Anschließen des Produkts am Lüftungsgerät
6 Inbetriebnahme
6.1 Vor der Inbetriebnahme auszuführende Schritte
6.2 Konfigurieren des Lüftungsgeräts
6.3 Entlüften des Systems
6.4 Einstellen der Pumpe des Erdwärmetauschers
6.4.1 Steuermodi und -funktionen
7 Betrieb
7.1 Starten des Produkts
7.2 Stoppen des Produkts
7.2.1 Stoppen des Produkts in einem Notfall
8 Wartung
8.1 Wartungsplan
8.2 Filter austauschen
8.3 Überprüfen des Drucks und Befüllen des Systems
8.4 Reinigen des Produkts
8.5 Reinigen des Kondensatablaufs
8.6 Austauschen der Pumpe
8.7 Austauschen des Ausdehnungsgefässes
8.8 Austauschen des Füllventils
8.9 Austauschen des Druckmanometers
9 Fehlersuche
10 Entsorgung
10.1 Demontieren und Entsorgen von Produktteilen
11 Gewährleistung
12 Technische Daten
12.1 Übersicht über die technischen Daten
12.2 Schaltpläne
13 EU Konformitätserklärung
14 Montagebericht
1
...
...
24
25
26
27
28
...
...
46