User Manual

GB
Introduction |
5
1 Introduction
1.1 Product description
The product is a geothermal heat exchanger with a circulation pump and housing made of expanded polypropylene
(EPP). The product is adapted for the use with ventilation unit.
A geothermal heat collector absorbs the temperature of the soil and transfers the temperature to the geothermal heat
exchanger.
The product increases the temperature of the outdoor air during winter season to prevent damage to the ventilation
unit. During summer season the product decreases the outdoor air temperature to make a pleasant indoor
environment.
1.2 Intended use
The product is made for use with the comfort ventilation systems. Any other use is considered an improper use and can
lead to damages to equipment and persons.
1.3 Document description
This document contains instructions for installation, operation and maintenance of the product. The procedures must be
done by approved personnel only.
Please contact your place of purchase for further assistance if there are any questions left which are not covered in this
manual.
1.4 Product overview
Fig. 1 Overview
X0 - filling valve
X1 – filling valve
X2 - filling valve
X3 - pressure gauge
X4 – expansion tank
X5 – pump
X6 - valve
X7 - junction box with relay
278349 | v01