Corrigo ventilation 3.4 manu

Manual Corrigo Ventilation, revision R Chapter 3 Installation and wiring 23
Analogue output signal

Description
E tool
©
Display
Inactive output
Not used
Not used
Y1 actuator heating
Heating Y1
Y1 heating
Y2 actuator exchanger
Exchanger Y2
Y2 exchanger
Y3 actuator cooling
Cooling Y3
Y3 cooling
Frequency converter, supply air fan
SAF
SAF
Frequency converter, extract air fan
EAF
EAF
Actuator Humidity control
Dehumidification/
Humidification
Humidity
Split of any one of temp outputs Y1, Y2,
Y3 or Y1 Heating/Y3 Cooling outputs
Split
Split
Extra controller
Extra unit control
Extra unit
Y1 heating / Y3 cooling, change-over
output
Y1 Heating/Y3 Cooling
Y1 heat/Y3 cool
Y4 extra sequence
Also used for control of recirculation air
damper 0...10V
Extra Sequence Y4
Y4 extra sequence
Y5 extra sequence
Extra Sequence Y5
Y5 extra sequence
Temperature output
Optional temperature 0…10V
Temperature
Temperature
Digital output signal

Description
E tool
©
Display
Inactive output
Not used
Not used
Start/stop Supply air fan Normal
SAF Start 1/1 Normal Speed
SAF 1/1-speed
Start/stop Extract air fan Normal
EAF Start 1/1 Normal Speed
EAF 1/1-speed
Start/stop Supply air fan Reduced
SAF Start 1/2 Reduced Speed
SAF 1/2-speed
Start/stop Extract air fan Reduced
EAF Start 1/2 Reduced Speed
EAF 1/2-speed
Start/stop circulation pump, heating
Heating Pump Start
P1 heating
Fire damper
Fire Damper
P1 exchanger
Sum alarm A- and B-alarm
Sum Alarm
P1 cooling
Sum alarm A-alarm
Sum Alarm A
Fire damper
Sum alarm B-alarm
Sum Alarm B
Sum alarm
Start/stop circulation pump, cooling
Cooling Pump Start
A-sum alarm
Start/stop circulation pump, liquid
exchanger
Exchanger Start
B-sum alarm
Activation-signal SAF frequency
converter
SAF Freq Start
SAF frequence
Activation-signal EAF frequency
converter
EAF Freq Start
EAF frequence
Activate heating
Heating Activate
Heat start
Activate cooling
Cooling Activate
Exch start
Activate exchanger
Exchanger Activate
Cool start
Exhaust air close-off damper
Exhaust Air Damper
Recirc damper