Corrigo ventilation 3.4 manu

Manual Corrigo Ventilation, revision R Chapter 2 About Corrigo 7
Chapter 2 About Corrigo
The Corrigo series comprises three model sizes: 8, 15 or 28 in-/outputs.
In each third generation model Corrigo, all applications are loaded in a separate memory area. The
models have article number E...-3 (where 3 stands for third generation). A new feature in version
3.3 are models with three communication ports. The 3 port Corrigo models have article number
E...3-3 (where the initial “3” stands for 3 ports). For more detailed information, see chapter 16.
The controllers are available with or without a front panel display and buttons. For all third
generation units, both with and without display, a separate, cable-connected terminal E3-DSP with
display and buttons is available.
All configuration and normal handling can be done using the display and buttons or using the
configuration tool E tool
©
, installed on a PC and connected via the communication cable E-cable.
2.1 News added in version 3.4
 A neutral zone for the supply air setpoint
 Modbus communication with pressure transmitter DPT-Dual-MOD-2500, HK instruments
 BACnet MS/TP
 Modbus slave TCP
 Flow-dependent analogue filter alarm
 Offset for fan control when free cooling
 Air pressure/flow compensation value, changeable
 Humidity control with extra controller
 New sensor for heat exchanger efficiency calculation
 New digital output for cooling with PWM
 New digital outputs for Y4 and Y5 (activate Y4/Y5)
 New digital input for alarm acknowledgement
 10 new digital inputs for external alarms
 New analogue output for selectable temperature 0...10 V
 New choice for pressure/flow compensation; outdoor temperature dependent
 Possibility to control two fans in parallel via Modbus: Supply air/supply air, extract
air/extract air
 Updated ED-TCV; additional readable and writable values
 Added Modbus signals
 Web server settings directly in the display
 Control of one additional motor, in- and output
 Alarm for extra controller when in manual mode
 Modbus communication with “ECblue” frequency converter
 Pressure measuring in in.wg (“inch of water gauge”). One factor (x100) is used in both
program and display.