DataSheet PKI Cen GB

Circular Fire Dampers | 9 / 16
Accessories
PRC-PKIC-DN
Cover Plates
Description
Cover plates are intended for the installation of re dampers with a re resistivity up to EI120S.
They provide the cover for insulation lling, which can be made from lower density mineral wool.
Fig. 4: Dimensions of the PRC-PKIC-DN
Ordering Code
PRC-PKIC-DN
NOTE: DN = Damper nominal diameter (mm)
Dimensions
Design
The cover plates are made from calcium silicate boards
with a thickness of 10 mm. Shape and dimensions are
shown in Fig. 4.
Cover plates are obligatory for dry installation!
Installation, Maintenance & Operation
Information about installation, maintenance
and operation is available in the
“UserManual_PKI-C”
document or nd more at
Systemair DESIGN.
DN / 2 + 85
25
DN + 170
40
25
DN + 2,2
10
5×ø5,5