Topvex FR, TR, ERV Compact Air Handling Unit Commissioning Record Item# 401131 2022-05-13
Contents 1 Commissioning Protocol...............................................................................................................................1 1.1 Function Settings................................................................................................................................1 1.2 Setting the weekly program................................................................................................................5 1.3 Alarm configuration..........................
1 Commissioning Protocol Company: Responsible: Customer Date Installation Object/Unit Item no. Installation address Model/size Serial number Time and date set: Weekly program set: External connections (sensors, dampers, external alarm, etc) performed: 1.1 Function settings Function Default setting Set value Temp. (ºF (ºC)) Control function temp. Set point Supply Extract Room 65 ºF (18 ºC) Supply Extract Room ºF (ºC) Outdoor temp. compensated supply air control.
Function Default setting Set value Airflow Fan control Airflow (CFM)1 (m3/h) (CAV) Airflow (CFM) (m3/h) (CAV) Pressure (in. wg.) (Pa) (VAV) Pressure (in. wg.
Function Default setting Set value Cooling (log on to system level required) Control function cooling Not Active 0-10V On/Off Not Active 0-10V On/Off On/Off function 1 step 2 step Binary step 1 step 2 step Binary step Number of binary steps 1 Lowering of min. control temp.
Function Default setting Set value Off Off Cool Recovery Mode: 36 ºF (2) ºF (ºC) Stopped Stopped Only EAF Only EAF Only SAF Only SAF Normal Run Normal Run Continuous Run Continuous Run Normally opened Normally opened Normally closed Normally closed External set point knob: Off Off Min. set point of knob: 54 ºF (12) ºF (ºC) Max set point of knob: 86 ºF (30) ºF (ºC) Start at temp.
1.2 Setting the weekly program Factory setting of the normal and reduced fan speed are: • Normal fan speed 07:00 to 16:00 Monday to Friday and Reduced fan speed remaining time Monday to Sunday. • Settings of 00:00 to 00:00 stops the unit. E.g. Changing Reduced fan speed setting from 00:00-24:00 to 00:00-00:00 will stop the unit outside the time of Normal fan speed. Note: Normal fan speed had priority over a reduced fan speed.
1.3 Alarm configuration Alarm settings Def. setting Set value Alarm settings 1. Run Error Supply Air Fan Def. setting Set value 35. Ventilation manual mode Class A Class C Delay 300 s Delay 0s The unit stopped at alarm No The unit stopped at alarm No 2. Run Error Extract Air Fan 36. Manual supply air control Class A Class C Delay 300 s Delay 0s The unit stopped at alarm No The unit stopped at alarm No 3. Run Error, P1-Heater (HW-units) 37.
Alarm settings Def. setting 13. Supply Air control error Set value Alarm settings Def. setting Set value 46. Manual P1-Cooler Class B Class C Delay 30 min Delay 0s The unit stopped at alarm No The unit stopped at alarm Largest diff. between setpoint and supply air No 50 ºF (10) 16. Low supply air temp 48. Internal battery error Class A Class A Delay 300 s Delay 0s The unit stopped at alarm No The unit stopped at alarm No Low inlet air temperature 50 ºF (10) 23.
1.4 Notes and Signature Notes: Signature Place: Signature: Tel. number: Commissioning Record Compact Air Handling Units 8 Systemair Inc.
Compact Air Handling Units Commissioning Record 9 Systemair Inc.
Systemair Inc. reserves the right to make changes and improvements to the contents of this manual without prior notice. Systemair Inc. 50 Kanalflakt Way Bouctouche, NB E4S3M5, Canada Phone +1 800 263 7081 10048 Industrial Blvd KS, 66215 United States Phone +1 800 263 7081 service@systemair.net www.systemair.