415005 Topvex TR Operation and Maintenance Instructions

Topvex TR800, TR1300, TR1800, TR4000 Operation and Maintenance Instructions

Systemair Inc.

3.1.1.1 Navigating the menus

The start display (the display normally shown) is at the root of the menu tree. Pressing DOWN will move

you through the menu options. UP will move you back through the options. To enter a higher menu level,

use UP or DOWN to place the cursor at the menu you wish to access and press RIGHT. If you have

sufcient log on privileges the display will change to the menu you have chosen.

At each level there may be several new menus which you move through using UP/DOWN. Sometimes

there are further sub menus linked to a menu or menu item. This is indicated by an arrow symbol at the

right-hand side of the display. To enter a menu, press RIGHT again. To step back to previous menu level,

use LEFT.

4 Commissioning

4.1 Before Starting the System

When the installation is nished, check that:

• The unit is installed in accordance with the installation instructions

• The unit is correctly wired

• Sound attenuators, if used, are installed and that the duct system is correctly connected to the unit

• Outdoor air intake is positioned with sufcient distance from pollution sources (kitchen ventilator

exhaust, central vacuum system exhaust or similar)

• All external equipment is connected

• The following data is available:

• Intended conguration, for example temperature control functions, fan control, external control

function etc.

• How the unit is supposed to operate according to a weekly schedule (normal and reduced speed)

4.2 Initial Setup of the Unit

On the rst start-up, the controller will start a special program for setting language, supply air temp

set point, Time & Date and week schedule for normal speed. Use the “OK” button to move between

changeable parameters and the UP/DOWN arrows to see the displayed alternatives. Conrm by pressing

“OK” once more. Move through the menu structure by use of the UP/DOWN arrows.

Select language by pressing OK followed by the

UP/DOWN arrow buttons. Conrm by pressing

OK. Move to the next level by pressing the DOWN

arrow button.

Choose Language

English