Corrigo ventilation 3.4 manu

8 Chapter 2 About Corrigo Manual Corrigo Ventilation, revision R
2.2 Application choice
On delivery, the main memory in the Corrigo is empty. All the application programs that can be run
in the Corrigo are located in a separate memory area.
On the first start-up, the controller will start a special program for downloading a suitable
application to the main memory.
For certain customised models, an application has already been selected when the product is
delivered. If so, the selected application will be started immediately.
E283W-3
PLA: 254 ELA: 30
Baud#1: 9600
Rev: 3.3-1-01
BACnet MS/TP
communication
port1
@1
The initial screen details the model of the Corrigo unit, its communication address, communication
speed and which software revision is loaded into the unit.
Press down arrow to go to ”Application choices”.
Application
System
Communication
Time/Date
Input/Output
Use the up and down arrows to move the cursor in the left edge of the display to the function you
wish to select. Select “Application” and press the right arrow.
Corrigo Vent.140616
Expansion unit 1
Expansion unit 2
Corrigo Vent.140327
Move the cursor to the desired application. Press the right arrow.
Title:
Corrigo Ventilation
3.4
Activate? No
Press ”OK” and change ”No” into ”Yes”. Press ”OK”.
The most recently loaded ventilation application will now be entered into memory. This will take
approx. 30 seconds. The application start screen is displayed.
To change languages, press the right arrow 3 times and then choose a language in the same way you
selected an application.
2.2.1 Additional menu options
System:
Information on the Corrigo model and serial number.
Controller
E283DW-3
Serial:
011310170148