Manualshelf

400896 Topvex FR Installation Instructions

ManualsBrandsSystemair ManualsAir Handling UnitsTopvex FR800HW-208-3-CAV ERV - 800 cfm False Ceiling Rotary Compact ERV w/ hydronic heat
12345678910
Installation instructions
Systemair Inc.
5
Topvex FR800, FR1600, FR3800
Fig. 4 Transporting units FR1600-3800
Fig. 3 Transporting the unit FR800
2.3 Transport and Storage
The Topvex FR800-3800 should be stored and transported in such way that it is protected against physical
damage that can harm panels, handles, display etc. It should be covered so that dust, rain and snow
cannot enter and damage the unit and its components. The appliance is delivered in one piece containing
all necessary components, wrapped in plastic on a pallet for easy transportation.
When transporting the Topvex unit use a forklift to transport the unit as shown below (gure 3 and gure 4).
Warning
The unit is heavy. Be careful during transport and mounting. Risk of injury through pinching. Use
protective clothing.
1 Warnings
The following admonitions will be presented in the different sections of the document.
Danger
• Make sure that the Mains supply to the unit is disconnected before performing any maintenance or
electrical work!
• All electrical connections must be carried out in accordance with local rules and regulations.
Warning
• In order for the unit to be considered safely installed the doors if equipped with handles have to be
locked with a key to prevent unauthorized or accidental opening
• The unit must be duct connected or in some other way provided with protection so that it is not
possible to come in contact with the fans through the duct connections
• The unit is heavy. Be careful during transport and mounting. Risk of injury through pinching. Use
protective clothing.
• Beware of sharp edges during mounting and maintenance. Make sure that a proper lifting device is
used. Use protective clothing.
Caution
• If the unit is installed in a cold place make sure that all joints are covered with insulation, and tape well
• Duct connections/duct ends should be covered during storage and installation
• Do not connect tumble dryers to the ventilation system
• Take care not to damage the water battery when connecting water pipes to connectors. Use a
spanner to tighten the connection.
Topvex FR03, FR06, FR08, and FR11
Installation instructions
206638
1
Systemair AB
Lift should only be done from the front
of the unit (or from the side using
extended forks).
Unit can be maneuvered from the
side using regular length forks.