415004 Topvex TR Installation Instructions

Topvex TR800, TR1300, TR1800, TR4000
Installation instructions
Systemair Inc.
16
3.5.1 Installation Procedure
1
Prepare the surface where the unit is to be mounted. Make sure that the surface is at, level and that it
supports the weight of the unit. Perform the installation in accordance with local rules and regulations.
2
Lift the unit into place.
Warning
Beware of sharp edges during the mounting and maintenance. Make sure that a proper lifting device is
used. Use protective clothing.
3
Level the unit with the help of the enclosed
mounting feet
4
Connect the unit electrically to the main power
through the all pole circuit breaker (safety switch),
which is enclosed inside the unit on delivery. The
wiring is led through the top of the unit casing
directly to the electrical connection box.
See enclosed wiring diagram.
Warning
The unit’s electrical connection to the main
power supply must be preceded by an all pole
circuit breaker with a minimum 0.1” (3 mm) gap.
Danger
• Make sure that the main power supply to the
unit is disconnected before performing any
maintenance or electrical work!
• All electrical connections must be carried out
by an authorized installer and in accordance
with local rules and regulations.
1 Warnings
The following admonitions will be presented in the different sections of the document.
Danger
• Make sure that the Mains supply to the unit is disconnected before performing any maintenance or
electrical work!
• All electrical connections must be carried out in accordance with local rules and regulations.
Warning
• In order for the unit to be considered safely installed the doors if equipped with handles have to be
locked with a key to prevent unauthorized or accidental opening
• The unit must be duct connected or in some other way provided with protection so that it is not
possible to come in contact with the fans through the duct connections
• The unit is heavy. Be careful during transport and mounting. Risk of injury through pinching. Use
protective clothing.
• Beware of sharp edges during mounting and maintenance. Make sure that a proper lifting device is
used. Use protective clothing.
Caution
• If the unit is installed in a cold place make sure that all joints are covered with insulation, and tape well
• Duct connections/duct ends should be covered during storage and installation
• Do not connect tumble dryers to the ventilation system
• Take care not to damage the water battery when connecting water pipes to connectors. Use a
spanner to tighten the connection.
Topvex FR03, FR06, FR08, and FR11
Installation instructions
206638
1
Systemair AB
1 Warnings
The following admonitions will be presented in the different sections of the document.
Danger
• Make sure that the Mains supply to the unit is disconnected before performing any maintenance or
electrical work!
• All electrical connections must be carried out in accordance with local rules and regulations.
Warning
• In order for the unit to be considered safely installed the doors if equipped with handles have to be
locked with a key to prevent unauthorized or accidental opening
• The unit must be duct connected or in some other way provided with protection so that it is not
possible to come in contact with the fans through the duct connections
• The unit is heavy. Be careful during transport and mounting. Risk of injury through pinching. Use
protective clothing.
• Beware of sharp edges during mounting and maintenance. Make sure that a proper lifting device is
used. Use protective clothing.
Caution
• If the unit is installed in a cold place make sure that all joints are covered with insulation, and tape well
• Duct connections/duct ends should be covered during storage and installation
• Do not connect tumble dryers to the ventilation system
• Take care not to damage the water battery when connecting water pipes to connectors. Use a
spanner to tighten the connection.
Topvex FR03, FR06, FR08, and FR11
Installation instructions
206638
1
Systemair AB