400895 Topvex FR Operation and Maintenance Instructions

Topvex FR800, FR1600, FR3800 Operation and Maintenance Instructions
Systemair Inc.
7
useUPorDOWNtoplacethecursoratthemenuyouwishtoaccessandpressRIGHT.Ifyouhave
sufcientlogonprivilegesthedisplaywillchangetothemenuyouhavechosen.
AteachleveltheremaybeseveralnewmenuswhichyoumovethroughusingUP/DOWN.Sometimes
there are further sub menus linked to a menu or menu item. This is indicated by an arrow symbol at the
right-hand side of the display. To enter a menu, press RIGHT again. To step back to previous menu level,
use LEFT.
4 Commissioning
4.1 Before Starting the System
Whentheinstallationisnished,checkthat:
• The unit is installed in accordance with the installation instructions
• The unit is correctly wired
• Sound attenuators, if used, are installed and that the duct system is correctly connected to the unit
• Outdoorairintakeispositionedwithsufcientdistancetopollutionsources(kitchenventilatorexhaust,
central vacuum system exhaust or similar)
• Allexternalequipmentareconnected
• The following data is available:
 • Intendedconguration,forexampletemperaturecontrolfunctions,fancontrol,externalcontrol
function etc.
• How the unit is supposed to operate according to a weekly schedule (normal and reduced speed).
4.2 Initial setup of the unit
Ontherststart-up,thecontrollerwillstartaspecialprogramforsettinglanguage,supplyairtemp
setpoint,Time&Dateandweekschedulefornormalspeed.Usethe“OK”buttontomovebetween
changeableparametersandtheUP/DOWNarrowstoseethedisplayedalternatives.Conrmbypressing
“OK”oncemore.MoveondowninthemenustructurebyuseoftheUP/DOWNarrows.
1
Selectlanguagebypressing“OK”andthenmove
betweenthealternativeswiththeUP/DOWN
buttons.Conrmbypressing“OK”.Movetothe
nextlevelbypressingthe“DOWN”button.
2
Shows the supply air temperature setpoint
Set the supply air setpoint. Default is 64o F (logon
to service level needed, code 2222, to change
default setting)
3
Ensure that correct time and date is displayed. If
not change the settings.
Choose Language
English
Supply Air Temp
setp.: 64 °F
Time: 12.46
Date: 2010-03-12
Weekday: Friday