415005 Topvex TR Operation and Maintenance Instructions

Topvex TR800, TR1300, TR1800, TR4000

Operation and Maintenance Instructions

Systemair Inc.

3 Interface Description

3.1 Control Panel

The SCP control panel is delivered with a 32.8 Ft. (10 m) cable that is connected to the panel and with a

fast coupling contact, connected to the Topvex unit. The contact is connected to the Corrigo controller in

the electrical connection box (pos.1, gure 3-4-5). The cable can be unscrewed in the back of the control

panel (gure 6)

3.1.1 Operating the Control Panel

Fig. 6 The control panel

Position Explanation

1 Alarm button: Gives access to the alarm list.

2 Alarm LED: Indicates alarm by ashing red light.

3 Write LED: Indicates by ashing yellow light that parameters can be set or changed.

4 OK button: Press this button to be able to change or set parameters whenever possible. Also

used to move between chargeable parameters in one dialogue window frame.

5 Cancel button: Used to abort a change and return to the initial setting.

6 Right/Left & Up/Down buttons: Used to move up, down, left & right in the menu tree. Up/Down

buttons are also used to increase values when setting or changing parameters.

7 Mounting holes

8 Connection block.

9 Connection to yellow cable.

10 Connection to orange cable.

11 Connection to red cable.

12 Connection to brown cable.

13 Connection to black cable

Table 4: Description of Control panel and wire connection

10 12

11 13