DataSheet TUNE R201711 en GB

ManualsBrandsSystemair ManualsAir Distribution ProductsTUNE-R-500-1-M5 - Circ.damper,leak.cl.A1,24Vactuat.spring return

Air Volume Controllers

1 / 2

Tune-R

Tight round damper

Description

Tune-R is a control and shut off damper for round ducts.

It is available in various versions with blade tightness

class 1 or 4 and casing tightness class A or C tested

according to EN 1751. A1 version is ideal in simple

installations for regulating the air volume in circular

ducts. C1 version is required for duct installation

with airtight requirements towards the outside

of the duct or to minimize the leakage towards

Ordering codes

TUNE-R -

Size

80 - 710 mm

Tightness class

handle

preparation for actuator

230V actuator

24V actuator

24V, 0-10V stepless actuator

230V spring actuator

24V spring actuator

24V, 0-10V stepless spring

actuator

Version

Stainless steel

(Optional)

A-304

A-316

for usage in the food industry

for general usage

Ordering code example:

TUNE-R-160-2-M3-A-304

Round Tune-R damper; size (diameter) 160 mm, tightness class C1, 24V

stepless actuator with an analog control mechanism DC 0-10V, manufactu-

red from stainless steel A-304.

the outside surroundings (for example hospital patient

rooms, industry applications, etc). C4 version is ideal

for use as a shut off damper where different parts

of the system need to be airtight separated from each

other because of the dangerous materials contained

in the air (surgery rooms). It can also be used as a shut

off damper for air handling units, combined with a spring

return actuator. In case of power outage the damper can

maintain a fully closed position. The damper’s special

structure enables external insulation up to 50 mm.

The damper can be supplied in a manual or motorized

version with an integrated position indicator.

The maximum allowed temperature is 100°C.

The maximum duct pressure is 1000 Pa.

The basic version with a plastic manual controller and a

low tightness class (A-casing, blade tightness class 0) is

also available in a diameters from 100 to 315 mm, please

see the Tune-R-B catalogue for details.

Design

The damper is manufactured from a galvanized

steel sheet and is silicone-free. All the gaskets are

manufactured from black rubber. Plastic bushings

are from a PPO material. All the materials are ame

retardant.

Summary of content (2 pages)

PAGE 1
Air Volume Controllers | Tune-R Tight round damper Ordering codes TUNE-R Size 80 - 710 mm A1 C1 Tightness class C4 1 2 3 24V spring actuator H M0 M1 M2 M3 M4 M5 Version 24V, 0-10V stepless spring actuator M6 Stainless steel for usage in the food industry (Optional) for general usage handle preparation for actuator 230V actuator 24V actuator 24V, 0-10V stepless actuator 230V spring actuator A-304 A-316 Ordering code example: TUNE-R-160-2-M3-A-304 Round Tune-R damper; size (diameter) 160 mm
PAGE 2
/2 | Air Volume Controllers Dimensions Weight A1 kg 80 C1 C4 Nm 0,9 100 1 125 1,1 140 1,2 200 180 1,5 250 2,1 280 3,2 6,1 450 8,1 400 560 2 max.182 4 4,2 400 500 2 3,7 300 355 Fig. 3: TUNE-R-H with manual handle 1,4 200 315 45 8×8 max.135 8 4 9,3 4 45 L 10,8 630 L 2 1,3 12 × 3 20 12,7 Fig. 4: TUNE-R-M with actuator max.182 max.135 50 72 45 45 L L Fig.