125904 Operating Instructions 602 10

INSTALLATION
The cooker hood is intended for installation
under, between or built into cupboards. The
cooker hood is equipped with electronic
control, a motorised damper, LED lighting
and a metal mesh filter. Installation, use,
care, maintenance, etc., are described in
these instructions.
TECHNICAL INFORMATION
Fig. 1
Width 60 cm.
Other measu-
rements
see Fig. 1
Electrical
connection
230 V~ earthed.
Max. connec-
tion output for
control cable
900 W at 230 V~
Lighting LED 2 x 2 W
INSTALLATION
Fixing parts, screws for mounting, etc., are
supplied with the cooker hood.
Electrical installation
The cooker hood can be supplied with an
electrical cable and earthed plug for con-
nection to an earthed wall socket as well as
a control cable for connection to an exter-
nal unit. The junction box and wall socket
must be accessible after installation is
complete.
Replacement of damper hatch
Attention! Applies only when basic ventila-
tion handled through the cooker hood.
The cooker hood is fitted with a sealed
damper. If the cooker hood is used in a kit-
chen that does not have separate basic
flow ventilation, it must be fitted with an ad-
justment hatch for basic flow. Replace the
damper hatch before installing the cooker
hood, see separate instructions
Assembly
Remove fat filter Fig. 10.
Fig. 2
18 991.0350.955/125904/2016-01-27