SAVE VTR 150K SERVICE AND ACCESSORIES INSTALLATIONV01 20210316
Table Of Contents
- 1 Overview
- 2 Important Safety Information
- 3 Configuration
- 4 Service
- 5 Accessories
26
|
Service
4.3.1.9 Overheat protection reset button
If the supply air temperature is low, it can indicate that the over heat protec-
tion is triggered. The overheat protection can be reset by pressing the reset
button.
4.4 Electrical connections
The SAVE VTR 150/K is wired internally from factory.
The electrical connection box can be found on the exhaust air outlet side of the unit. The print card can easily be taken
out from the unit, without using tools.
Fig. 6 Main circuit board position
4.4.1 Main circuit board layout
The SAVE VTR 150/K is equipped with built-in regulation and internal wiring.
| v1.1