SAVE VTR 150B INSTALLATIONV01 20210316

Installation |
11
6.3 Installation with 251-10/B cooker hood
Product name and number
• 251-10/B White Cookerhood – 96698
• 251-10/B Stainless Cookerhood – 96699
There are two options to mount the cooker hood:
• The cooker hood is attached directly to the bottom of the unit. This option can be used when the whole unit with a
cooker hood will be shifted forward using wood blocks to be alighted with the cupboards or when the cupboard size
matches the unit and no adjustments are needed. This way the unit can be simply mounted directly on the wall with
already attached cooker hood.
• The cooker hood is attached to the wall using included mounting brackets. Using this alternative method, a flexible
duct to connect the cooker hood and the unit must be used since it will be impossible to insert the cooker hood di-
rectly into the unit.
Follow instructions delivered with the cooker hood how to prepare it before installation.
Fig. 10 Installation of the cooker hood
1. Place a circular insulation on the cooker hood connector to prevent air leaking (figure 10, pos. 2).
Insert the cooker hood directly into the unit (figure 10, A). Screw the cooker hood to the bottom of the SAVE VTR
150/B unit (figure 10, pos. Y). The duct connector have to go into the unit. Make sure the duct connector is aligned
with the unit before starting (figure 10, pos. X). Use included screws and plastic spacers to prevent over-tightening
which could lead to bent cooker hood (figure 10, pos. 1).
2. Other installation method is to connect the cooker hood to the unit via a flexible duct (figure 10, B). Use mounting
mechanism which is delivered together with the cooker hood (figure 10, pos. Z).
254539 | v2