SAVE VTR 150B INSTALLATIONV01 20210316

Table Of Contents

Installation |

Fig. 16 Installation using brackets

2. Attach the brackets as far into the cooker hood as pos-

sible. Insert the cooker hood up into the hole in the

base of the cupboard. Pull out (figure 16, pos. A) and

use screws to fasten the brackets to the sides of the

cupboard (figure 16, pos. B). Tighten the brackets in

the cooker hood.

6.5 Wiring and configuration

Fig. 17 Connection of the cooker hood

Connect control signal wires from the cooker hood to UI2

and 24 V on the external connection board (figure 17).

For more information about connection board see 7.2 Ex-

ternal connections (Connection board), page 19.

Note:

UI2 default configuration: Cooker hood

6.6 Installation of a kitchen furniture panel

The kitchen furniture panel can be mounted directly on the unit, sides of cabinets or installed as a door. Parts for panel

installation directly on the unit and sides are delivered with the unit.

6.6.1 Mounting the kitchen furniture panel directly on the unit

Fig. 18 Top view

Depending on the kitchen cupboard depth, the unit might

have to be shifted forward for the panel to be aligned

with the cupboards.

Number Explanation

Wall or any other mounting surface

Wood block (if needed, 25–100 mm)

SAVE VTR 150/B

Adjustable bolts (15–25 mm)

Kitchen furniture panel (P)

254539 | v2