SAVE Commissioning Record Document in original language | 212925 · v02_1.8.
© Copyright Systemair UAB All rights reserved E&OE Systemair UAB reserves the rights to change their products without notice. This also applies to products already ordered, as long as it does not affect the previously agreed specifications. 212925 | v02_1.8.
Contents 1 2 3 4 5 General Information .........................................1 Basic settings .................................................1 2.1 Fan Control .......................................1 2.2 Airflow Levels Settings...................1 Advanced settings ...........................................2 3.1 Temperature Control .........................2 3.2 Fan Control .......................................2 3.2.1 Pressure Sensors* ................2 3.3 Demand Control .......................
General Information | 1 General Information Company: Responsible: Customer: Date: Installation: Object/Unit: Item: Installation address: Model/Size: Serial number (unit ID): Main board software version: IAM software version: HMI software version: Time and date set: External connections (sensors, dampers, external alarm, etc.) performed: 2 Basic settings 2.
2 | Advanced settings 3 Advanced settings 3.1 Temperature Control Function Default setting Set value Control mode Supply air temperature control Supply air temperature control Room temperature control Extract air temperature control Temperature unit Celsius Celsius Fahrenheit 3.2 Fan Control 3.2.
Advanced settings | Function Default setting Set value Status ON OFF ON 40% ____% Function Default setting Set value Mode Normal Soft Setpoint 3.5 Defrosting Control* Normal Hard * Only available if heat exchanger type is selected as Plate. 3.6 Components Make sure to record inputs and outputs of connected component and related sensors in sections 3.7 Input and 3.8 Output. 3.6.
4 | Advanced settings Function Default setting Set value Auto P-Band 4 °C ____ °C I-Time 0 ____ seconds Circulation Pump Start Temperature* 10°C ____°C Circulation Pump Stop Delay 5 min ____ min * Only available if Preheater or Heating is selected 3.7 Input Record changes only. 3.7.1 Analog Default setting Set value Type Input number Compensation Input number Compensation ___________________________ 1–7 -9.9...9.9°C ___ ____°C ___________________________ 1–7 -9.9...9.
Notes | 3.8 Output 3.8.1 Analog Default setting Set value Type Output number Output number Output type ___________________________ 1–5 ___ ___ V ___________________________ 1–5 ___ ___ V ___________________________ 1–5 ___ ___ V ___________________________ 1–5 ___ ___ V 3.8.
Phone +370 340 60165 Fax +370 340 60166 www.systemair.com SAVE · Commissioning Record · 212925 · en_GB · 2019-08-3 · v02_1.8.0 Systemair UAB Linų st.
