SAVE Commissioning recordv02 20191107

2
| Advanced settings
3 Advanced settings
3.1 Temperature Control
Function
Default setting
Set value
Control mode
Supply air temperature control Supply air temperature control
Room temperature control
Extract air temperature control
Temperature unit
Celsius Celsius
Fahrenheit
3.2 Fan Control
3.2.1 Pressure Sensors*
Function
Default setting
Set value
SUPPLY AIR FAN CONTROL
Pressure at 0V
0 Pa
_____ Pa
Pressure at 10V
300 Pa
_____ Pa
EXTRACT AIR FAN CONTROL
Pressure at 0V
0 Pa
_____ Pa
Pressure at 10V
300 Pa
_____ Pa
SAF K-Factor (Airflow type: Flow)
20
____
EAF F-Faktor (Airflow type: Flow)
20
____
Unit (Airflow type: Flow) l/s l/s
m
3
/h
Unit (Airflow type: Pressure)
Pa Pa
inwc
* Only available if Flow or Pressure airflow type is selected.
3.3 Demand Control
Function
Default setting
Set value
SENSORS OFF OFF
RH Sensor
CO₂ Sensor
Setpoint Summer
60 %
____ %
Setpoint Winter
50 %
____ %
CO₂ Sensor Setpoint 900 ppm ____ ppm
INDOOR AIR QUALITY CONTROL
Improving Air Quality
Normal Normal
High
Maximum
Good Air Quality
Low Low
Normal
3.4 Moisture Transfer Control
* Only available if heat exchanger type is selected as Rotating.
212925 | v02_1.8.0