TechSpec TPI 03 PZ201603
12 / 13
|
External louvers
Accessories
UR Mounting frame
Mounting frame from galvanized steel is available for
the PZ louver as an accessory. There are two different
frames available; one for standard for the normal
spaced blades louver (URL×H-PZ) and one for wide
spaced blades louver (UR-L×HPZS). Mounting frame is
manufatured from galvanized steel and incorporates
screw holes for easy xing in duct and bendable legs for
easy xing into the wall.
Ordering code
Ordering code example
UR - 500×800 - PZ
Mounting frame for PZ (thinner type) louver in size 500 × 800 mm
Installation, maintenance
and operation
The PZ louver can be xed into the end of the duct
with help of the mounting frame and xing screws
through side openings. If placed into the wall build
the bendable legs of mounting frame into the wall.
Then x the louver into the mounting frame through
holes in the sides of the louver.
Use warm water and cloth for cleaning.
Transport and storage
Dry indoor conditions with temperature range - 20 °C
to + 40 °C.
Warranty
The manufacturer provides a 24 month warranty period,
which begins on the day of the expedition noted
in the delivery note.
Supplement
Any deviations from the technical specications contained
herein and the terms should be discussed with the
manufacturer. We reserve the right to make any changes
to the product without prior notice, provided that these
changes do not affect the quality of the product and the
required parameters. Current information on all products
are available at www.systemair.com.
UR -
Dimensions L ×H
PZ
PZS
For normal louvers
For louvers with wide spaced blades
(H-3)x(L-3)
HxL