Quickguide Frico Control FCSA FCDA FCPA FCBA

dAtE -
tHi 21 °C
tLo 18 °C
Prog
HEAt
AL A -
AL H -
OFF -
SEt -
CLr -
LAP -
FC Frico Control - Quick guide
13
EN
Display alarm history.
Switch off the system. To switch off the system, select
(OFF) using OK. Wait 10 sec.
The system is then switched on by
pressing OK and selecting (On) with
up/down arrow and conrming with
OK.
Description Default
settings
Functions Menu options
For week program.
Set the following:
- year
- month
- day
- time (00:00)
For week program. Set the desired room
temperature (set point temperature) for
comfort mode.
For week program. Set the desired room
temperature (set point temperature) for
reduced mode.
Weekly program, see separate section.
Increase/decrease with up/down
arrow. Conrm each step with OK.
Switch between (OFF) and P1-P9
with up/down arrow. Conrm with
OK.
(off)
(function not
activated)
Switch heating on/off.
Switch between (On) and (OFF) with
up/down arrow. Conrm with OK.
On (on)
Switch between alarms with up/
down arrow. To see the serial
number for an alarm, press OK.
If no alarm: no A.
Switch between alarms with up/
down arrow. To see the serial
number for an alarm, press OK.
If no alarm: no A.
Factory reset. Resets values to factory settings.
Press OK. Select (YES), by keeping
OK depressed for 2 seconds
(countdown).
Change settings, see separate section Settings.
User menu
Pairing with local access point. Follow set
up guide in mobile app to pair it with the FC
system.
Press OK. A pairing period of 120 s
starts.
Display active alarm.
Increase/decrease with up/down
arrow. Conrm with OK.
Increase/decrease with up/down
arrow. Conrm with OK.