Quickguide Frico Control FCSA FCDA FCPA FCBA

#
602
15 (%) 0-100
592
15 (%) 0-50
690
1
691
0
687
438
FC Frico Control - Quick guide
15
EN
Settings
Settings are changed in User Menu:
Browse to SEt.
Conrm
Enter password using up/down arrows, conrm
each digit with OK. Password: 1932.
Enter the number for the setting that will be
changed using up/down arrows, conrm each digit
with OK. See table.
Select desired value according to table.
Conrm
Settings - General
Functions Default settings
Daylight saving/summer
time and winter time.
Description
1 (function activated) 0 (function not activated) / 1 (function activated)
Automatic time change-over.
Press to activate keypad.
Press and hold for 2 seconds.
After run speed - xed
Fan speed in xed after run mode.
After run speed - Auto
low
Low fan speed in automatic after run mode.
Door contact polarity
0 (normally open) / 1 (normally closed)
If other type of signal is used.
normally closed = short circuit - fan stops
normally open = short circuit - fan runs
Door contact reset
0 (no door contact has been detected) / 1 (door
contact has been detected)
Set this parameter to 0 to reset the memory
Door contact - Common
control
0 (disabled) / 1 (enabled)
Set to 0 if the product only shall react to it’s own
door contact. Set to 1 if the product shall react to all
door contacts in the same zone.
1 (enabled)