INSTALLATION OPERATION AND MAINTENANCE INSTRUCTION KV DUO KVK DUO KVK001
Table Of Contents
- 1Introduction
- 2Safety
- 3Transportation and storage
- 4Installation
- 4.1 To do before the installation of the product
- 4.2 To install the product
- 4.2.1 To open the product
- 4.2.2 To attach the connection box
- 4.2.3 To install the KVK Silent fan and the KVK Slim fan
- 4.2.4 To install the KVK DUO fan and the KVK fan
- 4.2.5 To install the KV DUO 150 EC fan
- 4.2.6 To install the KV DUO 250 – 315 EC fan
- 4.2.7 To install the KV DUO 400 – 630 EC fan
- 4.2.8 To connect the ducts to the product
- 5Electrical connection
- 6Commissioning
- 7Operation
- 8Maintenance
- 9Troubleshooting
- 10Disposal
- 11Warranty
- 12Technical data
- 13Accessory overview
- 14EU Declaration of Conformity
- 15UK Declaration of Conformity
10 Disposal
The product follows the WEEE directive. This symbol on the
product or the packaging of the product shows that this
product is not domestic waste. The product must be recycled
at an approved disposal location for electrical and electronic
equipment.
10.1 To disassemble and discard
the parts of the product
1 Disconnect and disassemble the product in the opposite
sequence of electrical connection and installation.
2 Recycle the product parts and the packaging at an appli-
cable disposal location.
3 Obey the local and national requirements for disposal.
15