INSTALLATION OPERATION AND MAINTENANCE INSTRUCTION KV DUO KVK DUO KVK001
Table Of Contents
- 1Introduction
- 2Safety
- 3Transportation and storage
- 4Installation
- 4.1 To do before the installation of the product
- 4.2 To install the product
- 4.2.1 To open the product
- 4.2.2 To attach the connection box
- 4.2.3 To install the KVK Silent fan and the KVK Slim fan
- 4.2.4 To install the KVK DUO fan and the KVK fan
- 4.2.5 To install the KV DUO 150 EC fan
- 4.2.6 To install the KV DUO 250 – 315 EC fan
- 4.2.7 To install the KV DUO 400 – 630 EC fan
- 4.2.8 To connect the ducts to the product
- 5Electrical connection
- 6Commissioning
- 7Operation
- 8Maintenance
- 9Troubleshooting
- 10Disposal
- 11Warranty
- 12Technical data
- 13Accessory overview
- 14EU Declaration of Conformity
- 15UK Declaration of Conformity
11 Warranty
For warranty claims, send a written maintenance plan and
the commissioning report to Systemair. The warranty is only
applicable for these conditions:
• The product is correctly installed and operated.
• Motor protection is used.
• The instructions in the data sheets are obeyed.
• Maintenance instructions are obeyed.
• A product that is not operated continuously is operated for
a minimum of 1 hour each month.
12 Technical data
12.1 Technical data overview
Maximum ambient temperature, °C
70
Maximum temperature of transported air,
°C
Refer to the data sheet in the online catalogue at www.systemair.com.
Sound pressure, dB
Corrosion class
IP class
Voltage, current, frequency, enclosure
class, weight
Refer to the name plate. Refer to 1.7 Name plate page 3 for more information.
Motor data Refer to the motor name plate or the technical documentation from the motor
manufacturer.
12.2 Product dimensions
12.2.1 Product dimensions KVK Slim, KVK Slim EC
Note:
If the unit of measure is not specified, the dimensions are given in millimetres.
16