INSTALLATION OPERATION AND MAINTENANCE INSTRUCTION KV DUO KVK DUO KVK001
Table Of Contents
- 1Introduction
- 2Safety
- 3Transportation and storage
- 4Installation
- 4.1 To do before the installation of the product
- 4.2 To install the product
- 4.2.1 To open the product
- 4.2.2 To attach the connection box
- 4.2.3 To install the KVK Silent fan and the KVK Slim fan
- 4.2.4 To install the KVK DUO fan and the KVK fan
- 4.2.5 To install the KV DUO 150 EC fan
- 4.2.6 To install the KV DUO 250 – 315 EC fan
- 4.2.7 To install the KV DUO 400 – 630 EC fan
- 4.2.8 To connect the ducts to the product
- 5Electrical connection
- 6Commissioning
- 7Operation
- 8Maintenance
- 9Troubleshooting
- 10Disposal
- 11Warranty
- 12Technical data
- 13Accessory overview
- 14EU Declaration of Conformity
- 15UK Declaration of Conformity
A. Mains supply, 230 V 1~AC (10 A)
B. Analogue sensor (for example, pressure sensor)
C. Analogue sensor (for example, pressure sensor type PT1000)
D. Digital sensor (for example, IR presence detector)
E. Alarm output (maximum 24 V AC/DC, maximum 500 mA Cosφ >0.95)
F. Output to EC fan
G. Output to analogue actuator with 24 V DC supply
H. Output to digital signal (DC, maximum 24 V, 1 maximum 50 mA)
I. Output to analogue actuator (for example, heat regulator)
J. Connection to Modbus
K. Connection to room unit (RU)
Room Unit (RU)
Br + 24VDC
Y +0-10V
Gr-
Bl (GND)
R+ 24VDC
Y +0-10V
W -
CB
A
B
GND
24V
REF
T1
I2
I1
24V
C
B
A. CB = Control Board
B. Analogue sensor (for example, pressure sensor)
C. Analogue sensor (for example, pressure sensor type PT1000)
30