INSTALLATION OPERATION AND MAINTENANCE INSTRUCTION KV DUO KVK DUO KVK001
Table Of Contents
- 1Introduction
- 2Safety
- 3Transportation and storage
- 4Installation
- 4.1 To do before the installation of the product
- 4.2 To install the product
- 4.2.1 To open the product
- 4.2.2 To attach the connection box
- 4.2.3 To install the KVK Silent fan and the KVK Slim fan
- 4.2.4 To install the KVK DUO fan and the KVK fan
- 4.2.5 To install the KV DUO 150 EC fan
- 4.2.6 To install the KV DUO 250 – 315 EC fan
- 4.2.7 To install the KV DUO 400 – 630 EC fan
- 4.2.8 To connect the ducts to the product
- 5Electrical connection
- 6Commissioning
- 7Operation
- 8Maintenance
- 9Troubleshooting
- 10Disposal
- 11Warranty
- 12Technical data
- 13Accessory overview
- 14EU Declaration of Conformity
- 15UK Declaration of Conformity
1.7 Name plate
1
32
11
13
12
7
8
910
4 5 6
1. Type designation: Product name, dimension and motor
type. Refer to 1.7.1 Type designation page 3.
2. Input power, W
3. Frequency, Hz
4. Certifications
5. Scannable code
2
6. Find more information about the product on the System-
air documentation portal
2
7. Country of production
8. Airflow direction arrow
9. Weight, kg
10. Serial number: part number/production number/produc-
tion date
11. IP class, enclosure class
12. Current, A
13. Voltage, V
Note:
The data on the name plate applies to “standard air” that is
specified in the standard ISO5801.
1.7.1 Type designation
Product
name
KV DUO EC KVK DUO KVK KVK Silent KVK Silent
EC
KVK Slim KVK Slim
EC
Dimension 150 125 125 100 100 100 100
250 160 160 L 125 125 125 125
315 200 160 M 160 160 160 160
400 250 200 200 200 200 200
500 315 L** 250 250 250 250 250
630 315 315 315 315
355 355 355 355
400 400 400 400
500 500 500 500
Motor type EC: Elec-
tronically
commutated,
1–phase,
230 V
AC, 230 V,
1–phase
AC, 230 V,
1–phase
AC, 230 V,
1–phase
EC: Elec-
tronically
commutated,
1–phase,
230 V
AC, 230 V,
1–phase
EC: Elec-
tronically
commutated,
1–phase,
230 V
EC: Elec-
tronically
commutated,
3–phase,
400 V
AC, 400 V,
3–phase
1.8 Product liability
Systemair is not liable for damages that the product causes
in these conditions:
• The product is incorrectly installed, operated or
maintained.
• The product is repaired with parts that are not original
spare parts from Systemair.
• The product is used together with accessories that are not
original accessories from Systemair.
• The product is used without motor protection.
3
2. Use a mobile device to scan the scannable code and go to the Systemair documentation portal for more documentation and document
translations.